grizz
Full Member
Posts: 180
|
Post by grizz on Aug 25, 2013 11:31:49 GMT -5
Well, luck does favour the brave.... or am I missing something here? Popped around to Mickey's this morning for a chat and he was cleaning up a huge pot and reviving the plant inside it, from a job he did yesterday. His sons work rebuilding, decorating and gutting office space. Yesterday they had to take down a load of offices, and one of the casualties ended up being a load of White Oak skirting boards. They are 90mm wide and I am not sure how thick...... Hope you are getting my drift here. Anyway, a load had been claimed by one of the guys on the job, buut there were still some in the back of his van he mentioned, if I was interested in them before he went to the skip. So I cleared the lot out and brought them home in the hope I could salvage some bits for the garden furniture we have, that has seen a lot of seasons outside and are now starting to show their age. I previously rebuilt a garden bench using offcuts of White Oak as well, which is still in use. Once I had sorted the pile out, this is what I was left with..... The pile to the right is all under 1.8 meters long, so only good for rebuilding the furniture. The pile to the left though, has about 19 strips, and at 90mm wide, I need 18 strips to remake the floor of the truck which is currently plywood. After sorting it out, stashed under the bike trailer for now. The cleaning up of the wood to get all the glue etc off it will take some time. Unfortunately the side I need to use is the side with the glue, the other side it grooved.
|
|
grizz
Full Member
Posts: 180
|
Post by grizz on Sept 13, 2013 12:47:44 GMT -5
After work today I went down to the garage to check something out that has bugged me for a while. The truck has some white plastic panels along the bottoms of the doors, and when I bought it, my suspicion was that they were covering holes. Presumably speaker holes. But you could not feel it, as the plastic is quite thick. Ideally I would be happy with intact all steel door panels, but hey..... if the holes are there..... make lemonade. Et Voila !!!! Test fitted the 6 X 9 200 Watt speakers I had hidden for a rainy day and even the mounting holes correspond. I also have an amp in the garage that I gave to a friend a few years ago, along with a 12 inch Sub, which should drive the pair of 4 ways quite adequately. Of course there are also a pair of speakers mounted in the "B-Pillars" behind my head, but I will be leaving them alone. Along with the 400 Watt speakers in the doors, it will be way more noise than I need. Over the weekend I have a few bits to do, including going to see a guy about airbrush painting a skull. I may pop over to Martins, as he is in the electronics game and I want to fit a beeper inside the cab to my indicator, so that I can remember to switch them off after I go around a corner. He also has rubber grommets which he uses in his daily job, or removes from customers cars, so maybe fit some when fitting the speakers in the doors.
|
|
grizz
Full Member
Posts: 180
|
Post by grizz on Sept 14, 2013 4:19:59 GMT -5
Years ago I gave this amp and sub speaker to my mate Dirk for a little Suzuki van he had, but it got stolen within a week of him purchasing it. So he never got to use them. When I saw him recently and mentioned that I was going to investigate the doors to see if they had holes and if I could fit the 200watt 6X9 speakers I had in my secret reserve stash, he said he still had the amp and sub, just needed to find them, and I could have them back. About 25 minutes later and typically the last storage crate he looked in, they came out. I cannot remember the power output of the Sub, but had it in a car before and it was more than sufficient. So now just need to figure out where to mount it in the truck, maybe use an old surround sound box. Looking forward to getting all this sorted.
|
|